Black Diamond Pad Guide
Not sure what the best Black Diamond pad to use on your floor. The helpful guides below will outline the what, when, and where for all of your Black Diamond pads.
Charts
Black Diamond Floor Guide
Floor Type | How to clean with Black Diamond Pads | Recommended Products | ||
---|---|---|---|---|
Polished Concrete | Daily maintenance with green pad. Dry buffing is effective for higher gloss. |
Red White Yellow Green |
||
Terrazzo, Marble, Limestone, Travertine |
Ideal for upgrading and daily maintenance with green pad. Dry buffing is effective for higher gloss. On surface in good condition, treated with chemical crystallization, use only green pad for maintenance. | Red White Yellow Green |
||
Vinyle (VCT) | For use on coated floors only. Red pad can be used in scrub and recoat applications. Use the SuperClean pad for routine maintenance and SuperGloss to achieve a high shine on finishes in good condition. | Red White Yellow Green Purple |
|
|
Rubber Flooring | Ideal for daily cleaning and polishing. | White Yellow Green |
||
Ceramic Tile (glazed), Ceramic Tile (unglazed), Quarry Tile, Porcelain, Terra Cotta |
Deep clean with the yellow pad and clean daily with the green pad. | Yellow Green |
||
Resin Floor (Epoxy, Acrylic) |
Older, heavily soiled floors can be cleaned with the red pad. Use the green pad for routine maintenance. | Red White Yellow Green |
||
Linoleum | Daily maintenance with the green pad. | Green
Purple |
||
Wood Floors | Finished wood flooring can be cleaned with the green. | Green
Purple |
|
Black Diamond Steps by Application
Step | Black Diamond Product | When to Use | Machine Type | Wet or Dry Use | End Result |
---|---|---|---|---|---|
1 | Red 400 Grit | Heavily worn floors with many scratches & stains | Low speed (Up to 350 RPM) | Wet | Light honing & restoration |
2 | White 800 Grit | Light cleaning needed with smaller amount of scratches & stains | Low speed (Up to 350 RPM) & High speed (1500-3000 RPM) | Low speed – Wet High speed – Dry |
Matte Gloss |
3 | Yellow 1500 Grit | Bring initial luster back & prepare for final polishing | Low speed (Up to 350 RPM) & High speed (1500-3000 RPM) | Low speed – Wet High speed – Dry |
Medium Gloss |
4 | Green 3000 Grit | Highest gloss desired, daily cleaning & maintenance | Low speed (Up to 350 RPM) & High speed (1500-3000 RPM) | Low speed – Wet High speed – Dry |
High Gloss |
** Please note that you do not always need to start with Step 1. The condition of your floor will determine which grit level is best suited for beginning the restoration process. You can also choose to stop the restoration process at any step if it is your preferred gloss level.