Front Slotted Squeegee Blade (#MPVR08040) for IPC Eagle 28" & 32" Walk Behind Auto Scrubbers

Product Description

This front squeegee blade fits the IPC Eagle 28" and 32" automatic floor scrubbers, specifically the CT70, CT70ECS, CT71, CT71XP, CT80, CT90BT70, CT90BT85, CT110BT70, CT110ECS, CT110BT85, CT160BT70 & CT160BT85 models. It is a replacement blade that fits perfectly onto the squeegee assembly on the rear of the IPC Eagle 28" & 32" walk behind & ride-on automatic floor scrubbers.

For a completely new squeegee assembly that replicates what you received with your new scrubber, you'll also have to order a new rear replacement squeegee along with this front blade. This will allow you to start recovering solution like the machine is new again. We recommend using a defoaming solution in your recovery tank to preserve vacuum motor life & make sure your auto scrubber is operating at as close to 100% as possible.

Each squeegee blade can be used on all 4 sides. You can use the front side of the squeegee, then rotate, so the back side is facing forward. Once those 2 sides are compromised, you can then flip it upside down, and use both of those surfaces. Squeegee change outs are easy because no tools are required to switch them out. We recommend rotating your squeegees every 20 hours of scrubbing, so they wear evenly.