Product Description
This dual jet wand has been created to out perform your common carpet drag wand to allow you to recover 30% more moisture from your carpet while extracting than normal carpet wands. This is thanks to an adjusting glide system that generates a consistent seal on the floor despite the angle you are using the wand at (as seen by our diagram to the right). The consistent seal creates more suction to leave your carpet dry in no time. The adjusting glide on the head allows you to use the wand with more of a natural movement since the head adjusts with each movement to create consistent recovery across your whole extraction job.
This 12" wand comes with dual #04 spray tips. There is also a single jet with #08 spray tip version available. Both wands lay down the same amount of solution, the dual jet wand will just spray the water down more consistently over the entire spray pattern. Both are available to be used with the non-heated CleanFreak® 120 PSI carpet cleaning extractor or with any type of low pressure (100 - 250 PSI) non-heated box style carpet extractor.
*Please Note: Even though the wand can handle up to 1000 PSI of pressure, the wand should only be used on non-heated machines with low pressure (100 - 250 PSI) for best results.
For other wand options, please check out our full line drag wands to find the right wand for your carpet cleaning.
Quick Overview
- For use with non-heated extractors
- High pressure wand (0 - 1,000 PSI)
- 12" cleaning width
- 2 spray jets, #04 orifices
Product Specs
Documents
Click here to make a request.