Product Description
Looking for a wand that is able to out preform your common carpet drag wand? This single jet carpet extraction wand has you covered. The wand is able recover 30% more moisture from your carpeting than normal carpet wands, all thanks to an adjustable glide system that generates a consistent seal on the floor despite the angle you are using the wand at. View our diagram in the pictures to see how the self-adjusting glide (shown in orange) slides up and down as the angles change during use. The tighter seal created by the self-adjustment creates a better suction, resulting in quicker drying times and less stress on your body since less recovery passes are required. The glide allows you to use the wand with more of a natural movement to allow for consistent recovery across your whole extraction job.
This wand is the same wand that comes with packaged with the non-heated CleanFreak® 120 PSI carpet cleaning extractor, so if you are looking for a replacement, this is the right place to be. This wand is also not limited to this machine and can be used with any type of low pressure non-heated box style carpet extractors.
*Please Note: Even though the wand can handle up to 1000 PSI of pressure, the wand should only be used on non-heated machines with low pressure (100 - 200 PSI). The larger #08 orifice jet opening produces more water than #02 orifice found in our other 12" adjusting glide wand. With this extra output, the pumps will struggle to keep the water at a high PSI. The extra stress can lead to a shorter motor lifespan. We also sell replaceable non-heated brass jet tips for this wand if the jet ever wears out or becomes damaged.
The single jet lays down the solution evenly at a 110° angle across the entire width of the head of the drag wand. We also offer a dual jet wand if you are looking for more cleaning power. Side wings are built into the wand's head to prevent any type of overspray from landing outside the spray range. The wand is lighter than typical drag wands. Add this benefit to the results of a dryer carpet, and less energy needed for extracting your carpets and you can see why this wand may be the right wand for your carpet extractor.
Quick Overview
- For use with non-heated extractors
- High pressure wand (0 - 1,000 PSI)
- 12" cleaning width
- 1 spray jet, #08 Orifice
Product Specs
Documents
Click here to make a request.