60 Amp Bridge Rectifier for a 1.5 HP Imperial Motor (#B13756) for High Speed Burnishers

Product Description

This 60 amp bridge rectifier fits most floor burnisher motors. It is made specifically for Imperial motors that are rated at 1.5 horsepower. If you are consistently replacing this rectifier on your burnisher, you should first take a look at our floor burnishing procedures. The most common problem we have found is when the burnisher is started on the floor instead of starting it in a leaned back position, and then slowly lowering the head onto the floor. When starting the machine on the floor, you are creating a ton of drag which pulls more electricity through this rectifier. Over time this will overload and weaken the rectifier, effectively burning it our. Starting the machine while it is tilted back, and then lowering it onto the floor will lessen the load put on the rectifier, effectively lengthening its life span.

For more repair parts, please take a look at our full line of floor buffer & burnisher parts, which can be found in our parts department.

Replaces These Rectifiers

• CPL-VF44204 - CleanFreak® 1500HS & 1500HS-2 floor burnishers
• CRK-VF44204 - Clarke® 1500 RPM Floor Burnisher
• EAG-G11854 - IPC Eagle 1500 RPM floor tile polisher
• EDI-G11854 - Trusted Clean 1500 RPM & 2000 RPM floor burnishers
• TAS-VF44204 - Task-Pro 1500 RPM ultra high speed burnisher
• VIP-VF44204 - Viper VN1500 high speed floor burnisher