CleanFreak® 4.0 GPM Hot Water Pressure Washing Skid w/ Tank, Reels & Spray Gun (Gas Engine) – 3,500 PSI

This CleanFreak 4.0 GPM pressure washing system has a 225 gallon fresh water tank, a 14 HP Vanguard gas engine from Briggs & Stratton, a diesel fired heater, and is mounted to a steel framed skid. The steel frame has foklift channels to lift up and move the pressure washer skid around. It can be a portable unit that is moved around and transported around to different areas, or it can be permanently mounted in a truck bed or trailer. When permanently mounting, please check the vehicle or trailers gross weight limitations, as this skid will weigh approximately 3,800 pounds when the 225 gallon storage tank is filled with water.
The skid mount system comes with a 50' water supply line on a stainless steel reel, and 100' spray line that connects the spray gun, also on a stainless steel hose reel. Additional options for this unit include, a 21" or 24" flat surface cleaner, or dual hookups where 2 people can pressure wash simultaneously. The additional kit to run 2 spray guns simultaneously includes an additional 100' hose, reel, and gun.
With a 4 GPM output, this set up is perfect for most commercial cleaning jobs. It is "right sized" for cleaning store fronts, drive-thrus, outdoor eating areas, gas islands, and dumpster pads. We do have a 8.0 GPM set up available that is recommended for much larger jobs (20,000 ft² or more).
For other options, please take a look at our full lines of hot water gas and trailer mount pressure washers.
*Please Note: A 12 volt battery is required to run the burner on this unit, but is not included. We recommend going to a local Big Box store or a Batteries Plus to purchase a Group 12 Deep Cycle Battery for use with this system.