Product Description
This CleanFreak heated carpet extractor uses hot water and an adjustable glide wand to remove as much dirt from your carpets as mechanically possible. The hot water severs the bond between the dirt and the carpet fibers, allowing it to be recovered by the drag wand. The single jet wand, which is pictured below, has an adjustable glide that consistently recovers 30% more solution on each pass than traditional drag wands. For more information on how these amazing adjustable glide drag wands are able to accomplish what they do, please take a look at each one of their individual product pages. For a little extra cleaning power you may want to consider our Heated 500 PSI Portable Extractor, which is a step up from this 120 PSI machine. It may be just the extra cleaning power you've been looking for!
This machine is also the big brother to the 120 PSI non-heated carpet cleaning extractor, which can be found in our full line of box style carpet extractors. If you're looking for complete package that pairs a machine with the correct chemicals and accessories, please take a look at our carpet cleaning package deals.
Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you'll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built in circuit locator that will tell you if you're on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you're good to start extracting. If not, you'll need to search for another outlet.
*Please Note: Do not use extension cords with this machine unless they are a heavier gauge than the ones attached to the unit.
To make sure you're 100% ready for the task at hand, we recommend you looking through our carpet cleaning chemicals, power heads, and upholstery tools departments to make sure you are properly prepared.
Features
- Dual 1000 watt heaters provide outstanding heating power for hot water extracting.
- 12" adjustable glide drag wand recovers 30% more solution than standard wands.
- 2 power cords (black - vacs & pump | yellow - heaters) allows you to only run the vac motors & pump if needed.
- Side dump valve and back dump hose allows you to dump your solution in the most convenient place.
- Remove 2 bolts to tilt the tank back to easily access the interior where the pump, motors & heaters are located.
- Extremely portable, weighing only 95 pounds, this hot water extractor allows the user to access stairways and upper levels effortlessly.
- Comes backed from a USA company with a 1 year warranty the motors & parts, and 90 days on labor.
Caring for Your Carpet Extractor
Your carpet extractor should be winterized between uses if it is to be exposed to freezing temperatures. To winterize your machine, pour 1/2 gallon of windshield wiper fluid into the empty solution tank. Run the pump until fluid flows through the tank. Then run 1 gallon of water through the extractor before the next use.Quick Overview
- 120 PSI pump, 150" of water lift
- 12" single-jet drag wand & 25' vac hose / solution line combo
- 11 gallon solution / 13 gallon recovery
- Heats water to 210° F
Product Specs
Parts - 1 year, excluding wear & tear items
Labor - 90 days from an authorized service center